Paint Fill Application Guide

 

Items You Need:

• Acetone/Nail Polish Remover or Alcohol Swabs
• Microfiber Cloth (You may also use paper towels or rags)
• Paint Fills

 

Additional Items (Optional):

• Golf Club Clamp
• Nitril/ Latex Gloves
• Safety Eye Wear
• Apron

 

Instructions for Paint Fill Application:

 

1. Select your desired paint fill.

2. Prepare the paint pen by shaking well.

3. Remove the cap and press the tip repeatedly into a piece of paper or cardboard until paint begins to flow.

4. Fill the stamp impressions using small, tight circular motions until fully covered. If not filling stamp impressions, use the same technique on the desired area.

5. Allow the paint to dry for 15–20 minutes.

6. Using very light pressure, wipe away excess paint with a wipe, alcohol swab, or paper towel lightly dipped in acetone or nail polish remover. Use a separate swab for each color.

7. Allow paint to fully cure over the next 12–24 hours. Avoid exposure to sand, dirt, or moisture during this period.

 

 

For a more detailed step-by-step, please refer to our instructional Youtube video.

If you have any questions, please feel free to reach out to our team at: orders@clubstamping.com.